Metric Thread Table

Metric Standard Screw Table,

Metric Standard Screws Table; (Metric Thread Table) is one of the information that engineers and technical staff should have at hand. Since our site is on Design, it is a table that we will use in our designs, as well as a table that employees of large or small workshops should have immediately at hand when doing business. What is most needed is the diameter of the hole to be drilled before tapping. You can find the Drill Diameters for Metric Standard Screws here. Colloquially or in the industry, the Metric Standard Screw Table is called the Metric Thread Table.

Metric screw dimensions are given in the table below. It is basic information for designers. Because when designing any part, holes should be drilled according to the screw to be used.

Metric Thread Table, Metric Standard Screws

Metric Fine Thread Screw Table

Metric Fine Thread Screws consist of screws with a smaller pitch than Normal Standard Screw Thread pitches.

Metric Standard Screws Pitch (pitch) Thread dimensions M1 What is the pitch of the screw: 0.25

M2 What is the pitch of the screw: 0.40
M2.5 What is the pitch of the screw: 0.45
M3 What is the pitch of the screw: 0.50
M3.5 What is the pitch of the screw: 0.60
M4 What is the pitch of the screw: 0.70
M4.5 What is the pitch of the screw: 0.75
M5 What is the pitch of the screw: 0.80
What is the pitch of the M6 screw: 1.00
What is the pitch of the M8 screw: 1.25
What is the pitch of the M10 screw: 1.5
What is the pitch of the M12 screw: 1.75
M14 What is the pitch of the screw: 2.00
What is the pitch of the M16 screw: 2.00
M18 What is the pitch of the screw: 2.5
M20 What is the pitch of the screw: 2.5
M22 What is the pitch of the screw: 2.5
M24 What is the pitch of the screw: 3.00
M27 What is the pitch of the screw: 3.00
M30 What is the pitch of the screw: 3.5
M33 What is the pitch of the screw: 3.5
M36 What is the pitch of the screw: 4.0
M39 What is the pitch of the screw: 4.0
M42 What is the pitch of the screw: 4.5
M45 What is the pitch of the screw: 4.5
M48 What is the pitch of the screw: 5.0
M52 What is the pitch of the screw: 5.0
M56 What is the pitch of the screw: 5.5
M60 What is the pitch of the screw: 5.5
M64 What is the pitch of the screw: 6.0

Below is a table of Metric Standard Screws, as well as tables for Metric Fine Thread Screws and ANSI Unified screws.

Vida Links

Click here for Metric Standard Screws and Tap Drill Diameters

Metric Standard and Fine Thread Screws: Click here for manufacturing dimensions table

ANSI UN American Unified National Screws; Click For Manufacturing Dimensions Table

turkiye.gov.tr